FC8600 series premiere cutting plotter providing higher productivity and greater ease of use
Guaranteed 15m tracking and accuracy.
Includes basket and push rollers with 3 different pressure settings (*2) to provide a more stable media feed and to support a wider range of media
*1: Operated with Graphtec specified media and conditions.
*2: The center push rollers have 3 pressure settings, the end push rollers have two pressure settings.
| Model | FC8600-60 | FC8600-75 | FC8600-100 | FC8600-130 | FC8600-160 |
|---|---|---|---|---|---|
| CPU | 32-bit CPU | ||||
| Configuration | Grit rolling type | ||||
| Drive method | Digital servo drive | ||||
| Max. cutting area (W x L) (*1) | 610 mm x 50 m | 762 mm x 50 m | 1067 mm x 50 m | 1372 mm x 50 m | 1626 mm x 50 m |
| Cutting area of guaranteed accuracy (*2) | 590 mm x 15 m | 742 mm x 15 m | 1043 mm x 10 m, 894 mm x 15 m | 1342 mm x 10 m, 894 mm x 15 m | 1603 mm x 10 m, 894 mm x 15 m |
| Mountable media width | Min. 50 mm Max. 770 mm |
Min. 50 mm Max. 920 mm |
Min. 50 mm Max. 1224 mm |
Min. 50 mm Max. 1529 mm |
Min. 50 mm Max. 1850 mm |
| Max. cross cut width | 734 mm | 886 mm | 1191 mm | 1496 mm | 1750 mm |
| Number of push rollers | 2 rollers | 2 rollers | 3 rollers | 3 rollers | 4 rollers |
| Max. cutting speed | 1485 mm/s at 45° direction | ||||
| Axial acceleration | Max. 39.2 m/s2 (4 G) in 8 steps | ||||
| Cutting force | Max. 5.88 N (600 gf) in 48 steps | ||||
| Mechanical resolution | 0.005 mm | ||||
| Programmable resolution | GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL™: 0.025 mm | ||||
| Distance accuracy (*2) | Max. 0.1 mm or 0.1 % of plotted length | ||||
| Repeatability (*2) | Max. 0.1 mm in plot up to 2 m (excluding the expansion and contraction of the media) | ||||
| Minimum character size | Approx. 3 mm alphanumeric (varies depending on character font and media) | ||||
| Mountable number of tools | 1 tool (cutting blade, plotting pen or pouncing tool) in standard; 2 tools (cutting blade and plotting pen) when second penholder (optional) is installed |
||||
| Blade types | Supersteel (0.9 mm or 1.5 mm diameter) | ||||
| Pen types | Water-based fiber-tip pen, Oil-based ballpoint pen | ||||
| Pouncing tool type | Steel pin 1.2 mm diameter, required optional pouncing tool (PPA 33-TP12) | ||||
| Media types (*3) | Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25 mm thick, Sandblast resist rubber up to 1 mm thick |
||||
| Compatible paper for pouncing | Regular paper from 0.06 to 0.13 mm thick | ||||
| Light pointer | Built into the tool carriage | ||||
| Cross-cutter | Built into the tool carriage | ||||
| Perforation cutting | Supported (performed by force control) | ||||
| Registration mark sensing system | Scans the mark by optical sensor (ARMS5.0), Segment area and Multiple-mark compensation, 4-points axis alignment, Auto mark detect | ||||
| Standard interface | USB2.0 (High speed), RS-232C, and Ethernet (10BASE-T/100BASE-TX) | ||||
| Buffer memory | 2 MB | ||||
| Command sets | GP-GL / HP-GL™ emulation (Set by menu or command, and selects from GP-GL, HP-GL™, or Auto select) | ||||
| Condition settings | Dual configuration (save two (2) user settings with eight (8) separate condition setting for each user) | ||||
| Display | Graphic type LCD (3-inch, backlight) | ||||
| Power source | 100 V to 240 V AC, 50 / 60 Hz | ||||
| Power consumption | Max. 160 VA | ||||
| Operating environment | 10 to 35 °C, 35 to 75 % R.H. (non-condensing) | ||||
| Guaranteed accuracy environment | 16 to 32 °C, 35 to 70 % R.H. (non-condensing) | ||||
| External dimensions (W x D x H) | Approx. 1128 x 715 x 1219 mm | Approx. 1278 x 715 x 1219 mm | Approx. 1578 x 715 x 1219 mm | Approx. 1878 x 715 x 1219 mm | Approx. 2138 x 715 x 1219 mm |
| Weight | Approx. 38 kg including stand |
Approx. 42 kg including stand |
Approx. 46 kg including stand |
Approx. 50 kg including stand |
Approx. 59 kg including stand |
| Included software (*4) | Windows driver, Plotter controller, Graphtec Studio, and Cutting Master 3 | ||||
| Compatible OS (*4) | Windows 10 / 8.1 / 8 / 7 / Vista Mac OS 10.6 to 10.10 |
||||
| Compatible Standards | UL60950-1, cUL, CE mark (Low voltage and EMC), KC mark (Low voltage and EMC) | ||||
| FCC-A, EN55022-A | |||||
